|
|
DAX
Electronic Systems Automation
– Robotics – Electronic Instrumentation |
|
|
|
|
|
|
|
FI Testers DAX FIPC2 measurement system /part of
FI-ROBO or independent unit
DAX FIPC2 is a PC based universal
instrument intended for tests on different types of FI switches. Basically,
it consists of accurate current generators, voltage, time, conductivity
and sequence circuits. User interface provides easy test protocol editing and
simple menu system.
Technical characteristics:
·
Current ranges: 50, 100, 200, 500, 1000, 2000, 5000
and 10000mA ·
Current shapes: sinus, + and - half wave, 5 to 135
degrees truncated sine wave, + and -, +/- symmetrical 5 to 135 degrees
truncated sine wave ·
Current frequencies 16.66, 50, 60 and 200Hz ·
DC offset –10 to 10mA ·
Time measurements, Toff, 0 to 65000 micro seconds,
10 micro seconds resolution ·
Conductivity test for N, L1, L2, L3 lines ·
Test button check procedure with 115 and 230V ·
Switch on sequence check (N has to switch before L1,
L2, L3) ·
Free turnoff test: turn of at fault current and
pressed lever ·
Choice of test path, N, L1, L2, L3 ·
12 bit
resolution User can build any sequence and number of test and store them as test
data bank. Tolerance levels and values are easily edited DAX FI-KZS
·
Complete T/M system for ground-fault-switches FI,
FIG ·
AC current source, ranges
10,20,50,100,200,500,1000,2000mA ·
Voltage up to 20VAC ·
Current ramp in 20ms steps ·
12 bit resolution ·
Different current waveforms, user selectable with 1
degree resolution ·
Switch off time measurement 0.1ms to 10s ·
Switch failure detection ·
IEEE-488 and RS232 interface ·
Microcontroller and PC control, WIN95, WIN NT,
Win2000
|
|
|
|
|
|
