|
|
DAX
Electronic Systems Automation
– Robotics – Electronic Instrumentation |
|
|
|
|
|
|
|
Semiconductor Testers DAX
S1-ROB
·
Diode reverse and forward direction measurement and
evaluation ·
Reverse voltage generation, bipolar 0 to +/- 1500V ·
Reverse current generation, bipolar 0 to +/-0.1mA,
up to +/-1500V ·
Reverse current (leakage) measurement 0 to 0.1mA ·
Forward current generation, bipolar 0 to +/-5A ·
Forward voltage drop measurement 0 to 2.048V ·
12bit resolution, 1% accuracy ·
Motorola/Hitachi HD6803/6303 or 68HC11 controller,
IEEE-488 and RS232 interface ·
Main benefit of the instrument is its full solid
state construction. No relays are used to switch between reverse/forward and
ranges. Unique forward voltage drop principle is used, high voltage reverse
current and reverse voltage generators (+/-1500V). 1500V is not a limit for
design technique used, 300V increments are possible. DAX S1-BR
·
Bridge reverse and forward direction measurement ·
Same as S1-ROB but: ·
Diode reverse and forward direction measurement ·
Reverse voltage generation, bipolar 0 to +/- 1800V ·
Reverse current generation, bipolar 0 to +/-0.1mA,
up to +/-1800V ·
Reverse current (leakage) measurement 0 to 0.1mA ·
Forward current generation, bipolar 0 to +/-40.96A ·
Forward voltage drop measurement 0 to 4.096V ·
Motorola/Hitachi HD6803/6303 or 68HC11 controller,
IEEE-488 and RS232 interface DAX S1-WPR
·
Diode reverse characteristic measurement ·
Simple Go/NOGO tester for axial elements ·
Reverse voltage 0 to 2000V ·
Reverse current measurement ranges 100nA, 1000nA,
0.01mA, 0.1mA, 1mA DAX UREF-100
·
ZnO arrester
or high voltage diode reverse and breakdown tester ·
AC voltage source 0 to 100Veff, power up to 1000W. ·
High voltage output through transformer up to 60000V ·
Output transformer 100/6000V, 100/10000V up to
100/60000V for high voltage transformation. Transformer is a standard type
medium voltage measurement transformer. ·
Resolution 12 bit ·
Reverse current measurement with zero voltage drop 0
to 10mA or 0 to 20mA
DAX RTH-MPC
·
Transient thermal resistance measurement ·
If 1 to 100A ·
Im 1 to 100mA ·
Uf measurement 0 to 2.048V ·
Pulse duration 100 microsecond up to 10000 seconds ·
Uf measurement delay in 50 microseconds steps
·
12 bit resolution ·
Measured and calculated results: ·
Uf, Um, Ud, If, delta T, delta Uf, Pd, Rth ·
Motorola/Hitachi HD6803/6303 or 68HC11 controller,
IEEE-488 and RS232 interface ·
Industrial PC version with Windows
DAX-DCT
·
Limited function (just diode) curve tracer for
reverse characteristic evaluation ·
Reverse voltage 0 to 2000V ·
Reverse current measurement up to 100mA ·
Industrial PC and DOS for control, user interface,
statistics and data logging. |
|
|
|
|
|
